| PHYSICAL / MECHANICAL PROPERTIES | TRIAL METHOD | VALUE |
| Density | ASTM D1505 | 0,921 g/cm3 |
| Water absorption | ISO 62 - a 23°C 50% r.h. | < 0,01% |
| Elongation at break | ASTM D882B MD/SL/L | 400% |
| Tear resistance | ASTM D1922 MD/SL/L | 30 N/mm |
| Flexural elastic modulus | ASTM D709 | 100 MPa |
| Impact resistance | ASTM D1709 | 310 g |
| Breaking load | ASTM D882B MD/SL/L | 26 MPa |
| Working temperature | - | - 20°C / +60°C |
TECHNICAL CHARACTERISTICS
High impact resistance - Low sensible to "click" and "stress cracking" effect - Excellent resistance to chemical agents - Totally recyclable - Very good flexibility
It is recommended not to mount the polyethylene tube with fittings that deform the end too much more than 15%. "Creep" problems may occur with unsuitable fittings.
STANDARD MARKING:
| MEDIFLY PELD Ø4X6 LOT…./.... MADE IN ITALY
Marking is printed every 50 cm. Customized marking on demand
NORMS
A Declaration of Compliance about FCMs (Food Contact Manterials) can be requested at the time of order.
Login / Register 
