PHYSICAL / MECHANICAL PROPERTIES | TRIAL METHOD | VALUE |
Density | ASTM D1505 | 0,921 g/cm3 |
Water absorption | ISO 62 - a 23°C 50% r.h. | < 0,01% |
Elongation at break | ASTM D882B MD/SL/L | 400% |
Tear resistance | ASTM D1922 MD/SL/L | 30 N/mm |
Flexural elastic modulus | ASTM D709 | 100 MPa |
Impact resistance | ASTM D1709 | 310 g |
Breaking load | ASTM D882B MD/SL/L | 26 MPa |
Working temperature | - | - 20°C / +60°C |
TECHNICAL CHARACTERISTICS
High impact resistance - Low sensible to "click" and "stress cracking" effect - Excellent resistance to chemical agents - Totally recyclable - Very good flexibility
It is recommended not to mount the polyethylene tube with fittings that deform the end too much more than 15%. "Creep" problems may occur with unsuitable fittings.
STANDARD MARKING:
| MEDIFLY PELD Ø4X6 LOT…./.... MADE IN ITALY
Marking is printed every 50 cm. Customized marking on demand
NORMS
It is possible to request DoC (Declaration of Compliance) about FCMs (Food Contact Manterials) at the monent of the order and the guide to interpreting results.