Polyethylene PELD calibrated tubes - low density

Norms

REACH

ROHS

CONFLICT MINERALS FREE

CALIFORNIA PROPOSITION 65

Reg. (EC) 10/2011

Food Contact Materials certificate (FCMs)

Application sectors

PHYSICAL / MECHANICAL PROPERTIES	TRIAL METHOD	VALUE
Density	ASTM D1505	0,921 g/cm³
Water absorption	ISO 62 - a 23°C 50% r.h.	< 0,01%
Elongation at break	ASTM D882B MD/SL/L	400%
Tear resistance	ASTM D1922 MD/SL/L	30 N/mm
Flexural elastic modulus	ASTM D709	100 MPa
Impact resistance	ASTM D1709	310 g
Breaking load	ASTM D882B MD/SL/L	26 MPa
Working temperature	-	- 20°C / +60°C

TECHNICAL CHARACTERISTICS

High impact resistance - Low sensible to "click" and "stress cracking" effect - Excellent resistance to chemical agents - Totally recyclable - Very good flexibility

It is recommended not to mount the polyethylene tube with fittings that deform the end too much more than 15%. "Creep" problems may occur with unsuitable fittings.

STANDARD MARKING:
| MEDIFLY PELD Ø4X6 LOT…./.... MADE IN ITALY
Marking is printed every 50 cm. Customized marking on demand

NORMS

The raw material used to produce these tubes complies with:

Ministerial Decree 21/03/73 and following adjournaments
EU Regulation No. 10/2011 of 14/01/11 and following amendments
CE Regulation 1935/2004
FDA 21 CFR 177.1520
Ministerial Decree No. 174 of 06/04/04
Sensory/organoleptic tests according to ISO 4120:2021 and DIN 6653-1:2018-09.

A Declaration of Compliance about FCMs (Food Contact Manterials) can be requested at the time of order.

Polyethylene PELD calibrated tubes - low density - for food applications

Become distributor